APM SuperGuard PT-3 Bedienungsanleitung PDF herunterladen (Seite 5)

PT3 Features and Function List

DEVICE CONFIGURATION

GeoFence Setup --------- Uploads restricted geographic areas to PT3 Device

Function/ Feature Description

Manual Geo-Fence

activation

Users can setup one Geo-fence of 80m by pressing the GEO

button. When the device leaves the area, will send GPS data and

status to the Control Base through GPRS or SMS (fallback).

The Control Base send text message containing address details

and alert text to all Contact numbers.

Additional Geo-Fence

Setup

- Additional 4 Geo-fences can be loaded through

commands containing longitude/ latitude parameters.

If a Geo-Fence violation occurs, the device will send GPS data

and status to the Control Base through GPRS or SMS (fallback).

The Control Base will send text message containing address

details and alert text to all Contact numbers.

LOCATION AND TRACKING FEATURES

Location and Tracking: polling, setup tracking period and interval, start/ end tracking

Function/ Feature

Description

Automatic Location

Report

By default, the device will send updated GPS and status information via

GPRS to the Control Base in intervals of every 60 seconds.

If GPRS is not available at the time, the device will stop sending data

until GPRS is available again, unless a tracking schedule (described

below) has been configured, which allows sending data as SMS for

fallback.

If the device is not moving for a continuous period of 4 minutes, it will

switch to power saving mode by disabling GPS. GPS acquisition will

APM CO.,LTD

22F-6,No.180,jingping Rd.,jhonghe,City,Taipei County 23581,Taiwan (R.O.C.)

Tel:+886 2 8943 1966 Fax:+886 2 8943 4944

www.apm.com.tw e-mail:[email protected]

1 2 3 4 5 6 7 8 9

Keine Kommentare

APM SuperGuard PT-3 Bedienungsanleitung Seite 5