
ALARM FEATURES
Personal Security Alarm Messages:
Automatic and manually triggered alarm reports to Control Base and Contact
numbers
Function/ Feature Description
SOS Emergency
(indicator: SOS)
When SOS button is pressed, the Device will send the last available
GPS data and status through SMS to the Control Base.
The Control Base will itself send text message with address details,
time and alert text to all Contact numbers, with the text (example):
After sending SOS status, the Device will dial the number of Contact
#1. If a ‘busy’ signal is received, the unit will automatically dial
Contact #2, #3 and so on.
NOTE:
The GSM cannot distinguish between directly answering a call and
automatic answering services. If the busy-call is forwarded and
answered through the operator (f.e. “The person you have called is
temporarily not available” etc.), the module will accept it as a
successful connection.
Fall-Down/ Impact
Alarm
The device can be preconfigured and activated with either of three
G-Sensor triggers:
Small vibration = Moving Notice, will be triggered when the device is
picked up or otherwise moving
Fall-Down Alarm, will be triggered when the device is dropped or the
person who carries the device falls down
Impact Alarm, will be triggered when a sudden velocity drop, similar
to a car crash happens.
After sending G-Sensor alarm, the Device will send the location
information with alarm message to control base.
Moving Notice
(indicator: C1 receive
one phone call)
Send $VIB,x (x=0~9. 0=disable, 1=minimum sensitivity, 9=max
sensitivity)
When PT3 receive this command, the G-sensor will be activated, if
the device is being moved, an alarm call will be dialed to contact #1,
then hung up after 1 rings.
Geo-Fence Alarm
If the device has been configured with a set of restricted geographic
APM CO.,LTD
22F-6,No.180,jingping Rd.,jhonghe,City,Taipei County 23581,Taiwan (R.O.C.)
Tel:+886 2 8943 1966 Fax:+886 2 8943 4944
Kommentare zu diesen Handbüchern